Store

O thickness from 3 to 8 mm and packaged in rolls wide 1200 to 1400 mm and lengths 10 meters.

Rubber Flooring RYFEL is made of a green-colored rubber compound with an outer fluted surface, which is formed by longitudinal riffles. Rubber Flooring finds its application as floor protection, floors, work tables and much more. Rubber Flooring is available in two types: WIDE RIFLE: top width of riffle surface 4 mm, riffle height 1 mm, spacing between riffles 5 mm [caption id="attachment_9395" align="aligncenter" width="300"] Figure - rift wide[/caption]. FISCAL NARROWS: top surface width of riffle 1 mm, height of riffle 1.5 mm, spacing between riffles 2 mm [caption id="attachment_9396" align="aligncenter" width="300"] Figure - narrow rift[/caption]. Types of Rubber Flooring Available:

• general purpose (used inside buildings) ,
• Oil-Resistant,
• weather-resistant,
• electro-insulation.

Ways to install Rubber Flooring:

• spread in a free state (without sticking) on a durable substrate, such as concrete, wood, metal.
• glued to the substrate using adhesives commonly used in Construction for gluing Rubber Flooring.

Note: It is advisable to spread the Rubber Flooring to be glued beforehand on the substrate and leave it in a free state for a period of several days, in order to better form. The substrate should be prepared in accordance with generally accepted principles of adhesive technology - a clean and degreased surface, and in accordance with the specific instructions given by the adhesive manufacturer.

Available o 3 mm thick and packaged in rolls wide 1250 mm.

Rubber Flooring RYFEL is made of solid rubber, with an outer fluted surface, which is formed by longitudinal riffles. Rubber Flooring finds its application as floor protection, floors, work tables and much more. Rubber Flooring is available in two types: WIDE RIFLE: top width of riffle surface 4 mm, riffle height 1 mm, spacing between riffles 5 mm [caption id="attachment_9395" align="alignnone" width="300"] Figure - rift wide[/caption]. FISCAL NARROWS: top surface width of riffle 1 mm, height of riffle 1.5 mm, spacing between riffles 2 mm [caption id="attachment_9396" align="alignnone" width="300"] Figure - narrow rift[/caption]. Types of Rubber Flooring Available:

• general purpose (used inside buildings) ,
• Oil-Resistant,
• weather-resistant,
• electro-insulation.

Ways to install Rubber Flooring:

• spread in a free state (without sticking) on a durable substrate, such as concrete, wood, metal.
• glued to the substrate using adhesives commonly used in Construction for gluing Rubber Flooring.

Note: It is advisable to spread the Rubber Flooring to be glued beforehand on the substrate and leave it in a free state for a period of several days, in order to better form. The substrate should be prepared in accordance with generally accepted principles of adhesive technology - a clean and degreased surface, and in accordance with the specific instructions given by the adhesive manufacturer.

O 12 mm thick and packaged in rolls wide 1450 mm and lengths 10 meters.

Rubber Flooring RAMPA has a specially designed outer surface with longitudinal stripes 8 mm high and 24 mm wide, in order to allow animals to move safely on the trailer ramps used to transport them.

  Rubber Flooring types available:

• general purpose (used inside buildings) ,
• Oil-Resistant,
• weather-resistant,
• electro-insulation.

Ways to install Rubber Flooring:

• spread in a free state (without sticking) on a durable substrate, such as concrete, wood, metal.
• glued to the substrate using adhesives commonly used in Construction for gluing Rubber Flooring.

Note: It is advisable to spread the Rubber Flooring to be glued beforehand on the substrate and leave it in a free state for a period of several days, in order to better form. The substrate should be prepared in accordance with generally accepted principles of adhesive technology - a clean and degreased surface, and in accordance with the specific instructions given by the adhesive manufacturer.

Working Temperature: for oils from -30°C to +80°C; for fuels from -30°C to +60°C

APPLICATION Hose used for the free flow of gasoline and mineral oils. Also ideal for the free transfer of water and air in highly oily environments. Also readily used as an Oil-Resistant covering for cables and sharp steel parts in machinery and equipment. Hoses are weather and ozone resistant. Working Temperature For oils from -30°C to +80°C For fuels from -30°C to +60°C CONSTRUCTION Made according to PN-75/C-94250/32 from rubber based on NBR synthetic rubbers resistant to fuels and oils. SIGNING Hoses marked with a brown colored stripe.

Working Pressure: 6 bar (0.6 MPa) |. Bursting Pressure: 18 bar (1.8 MPa) |. Safety factor: 3:1 | Working Temperature: From -30°C to +80°C, briefly up to +100°C

CHARACTERISTICS Working Pressure - 6 bar (0.6 MPa) Bursting Pressure - 18 bar (1.8 MPa) Safety factor - 3:1 APPLICATION A reliable hose for water and light chemicals for general industrial and Agriculture applications, including irrigation and drainage systems. Also readily used for hot water cleaning of floors, walls and all kinds of equipment. Hoses are weatherproof and ozone resistant. On request, we can make a hose with increased abrasion resistance for mixtures of water with sand, silt or other substances with similar properties. On request, we make additional protection of Hoses with an external wire spiral to protect against deformation and excessive abrasion of the outer layer. This option applies to Hoses with nominal diameters larger than DN 12. Working Temperature From -30°C to +80°C Short-term up to +100°C CONSTRUCTION Hoses with a diameter up to DN 80 are made according to EN ISO 1403 (TYPE 1). Hoses with a diameter of DN 100 are made according to Stomil Bydgoszcz author's project WT-37/13/BZPG. Inner layer Black colored rubber made of SBR synthetic rubber resistant to hot water. Reinforcement Interleavers made of textile cord or high-strength synthetic threads. Outer layer Rubber made of SBR synthetic rubber of black color, resistant to abrasion and weathering and ozone. Up to a diameter of DN 12.5 the surface is smooth. Larger diameters with fabric imprint. SIGNING Diameters with a smooth surface are marked with white paint. Diameters with fabric imprint marked with green tape.

Working Pressure: 10 bar (1.0 MPa) |. Bursting Pressure: 30 bar (3.0 MPa) |. Safety factor: 3:1 | Working Temperature: From -30°C to +80°C; short-term up to +100°C

CHARACTERISTICS Working Pressure - 10 bar (1.0 MPa) Bursting Pressure - 30 bar (3.0 MPa) Safety factor - 3:1 APPLICATION A reliable hose for water and light chemicals for general industrial and Agriculture applications, including irrigation and drainage systems. It is also readily used for hot water cleaning of floors, walls and all kinds of equipment. Hoses are weatherproof and ozone resistant. On request, we can make a hose with increased abrasion resistance for mixtures of water with sand, silt or other substances with similar properties. Working Temperature From -30°C to +80°C Short-term up to +100°C CONSTRUCTION Hoses with a diameter up to DN 80 are made according to EN ISO 1403 (TYPE 2). Hoses with a diameter of DN 100 are made according to Stomil Bydgoszcz author's project WT-37/13/BZPG. Inner layer Black colored rubber made of SBR synthetic rubber resistant to hot water. Reinforcement Interleavers made of textile cord or high-strength synthetic threads. Outer layer Rubber made of SBR synthetic rubber of black color, resistant to abrasion and weathering and ozone. Up to a diameter of DN 12.5 the surface is smooth. Larger diameters with fabric imprint. SIGNING Diameters with a smooth surface are marked with white paint. Diameters with fabric imprint marked with green tape.

Working Pressure: 25 bar (2.5 MPa) |. Bursting Pressure: 100 bar (10 MPa) |. Safety factor: 4:1 | Working Temperature: From -30°C to +80°C; short-term up to +100°C

CHARACTERISTICS Working Pressure - 25 bar (2.5 MPa) Bursting Pressure - 100 bar (10 MPa) Safety factor of 4:1 APPLICATION A reliable hose for water and light chemicals of general industrial and Agriculture use for irrigation and drainage systems. Also readily used for hot water cleaning of floors, walls and all kinds of equipment. Hoses are weatherproof and ozone resistant. On request, we can make a hose with increased abrasion resistance for mixtures of water with sand, silt or other substances with similar properties. On request, we make additional protection of Hoses with an external wire spiral to protect against deformation and excessive abrasion of the outer layer. This option applies to Hoses with nominal diameters larger than DN 12. Working Temperature From -30°C to +80°C Short-term up to +100°C CONSTRUCTION Complies with PN-EN ISO 1403 (TYPE 3). Inner layer Black colored rubber made of SBR synthetic rubber resistant to hot water. Reinforcement Interleavers made of textile cord or high-strength synthetic threads. Outer layer Black colored SBR synthetic rubber rubber, abrasion and weather and ozone resistant. All diameters with fabric imprint. SIGNING Hoses are marked with green tape.

Working Temperature: From -25°C to +80°C; short-term up to +100°C

APPLICATION Hose for general-purpose water without pressure requirements in industry and Agriculture resistant to weathering and ozone. It is also readily used as a cover for cables and sharp edges of steel components in machinery and equipment. Working Temperature From -25°C to +80°C Short-term up to +100°C CONSTRUCTION Black colored rubber made of SBR synthetic rubber without reinforcement. SIGNING Hoses marked with a green stripe.

Working Pressure: 20 bar (2.0 MPa) |. Bursting Pressure: 60 bar (6.0 MPa) |. Available colors: black or blue | Working Temperature: -30°C to +80°C

CHARACTERISTICS Working Pressure - 20 bar (2.0 MPa) Bursting Pressure - 60 bar (6.0 MPa) Available colors - black or blue APPLICATION A versatile, flexible and lightweight hose for transferring oil, water, light chemicals and compressed air. Eagerly used for pneumatic tools, especially in highly oily environments. Hoses are weather and ozone resistant. Working Temperature From -30°C to +80°C CONSTRUCTION Designed according to Stomil Bydgoszcz WT-49/17-1/BZPG author's project. Inner layer High-quality oil-resistant NBR rubber compound. Reinforcement Braided with high-strength synthetic threads. Outer layer High quality black or blue colored synthetic rubber, resistant to oil, abrasion and weathering and ozone. Hoses surface is smooth. SIGNING Hoses marked with white paint.

Working Pressure: 10 bar (1.0 MPa) |. Bursting Pressure: 40 bar (4.0 MPa) |. Class: A | Categories: N-T |. Safety factor: 4:1 | Working Temperature: From -30°C to +80°C; short-term up to +100°C

CHARACTERISTICS Working Pressure - 10 bar (1.0 MPa) Bursting Pressure - 40 bar (4.0 MPa) Class A Category N-T Safety factor 4:1 APPLICATION A reliable hose commonly used to supply compressed air to pneumatic tools. It is also designed for the transfer of water and light chemicals in industry and Agriculture. It features a high quadruple safety factor. It is resistant to abrasion, weathering and ozone. On request, we can protect Hoses with cord-reinforced diameters with an additional outer wire spiral to protect against deformation and excessive abrasion of the outer layer of the hose. Working Temperature From -30°C to +80°C Short-term up to +100°C Hoses are also available for continuous use from -40°C and up to +100°C. CONSTRUCTION Complies with EN ISO 2398 (TYPE 1). Inner layer Black colored rubber made of SBR synthetic rubber. Reinforcement Variable depending on the diameter - textile cord spacers or braided with high-strength synthetic threads. Outer layer Rubber made of SBR / EPDM synthetic rubber, black in color, resistant to abrasion and weathering and ozone. Diameters up to DN 12.5 smooth, larger with fabric imprint. SIGNING Diameters with a smooth surface are marked with white paint. Diameters with fabric imprint marked with light blue tape.

Working Pressure: 10 bar (1.0 MPa) |. Bursting Pressure: 40 bar (4.0 MPa) |. Class C: high resistance to oils | Categories: N-T |. Safety factor: 4:1 | Working Temperature: From -30°C to +80°C; short-term up to +100°C

CHARACTERISTICS Working Pressure - 10 bar (1.0 MPa) Bursting Pressure - 40 bar (4.0 MPa) Class C - high resistance to oils Categories N-T Safety factor 4:1 APPLICATION A reliable hose commonly used in environments with high concentrations of oil Substances Designed to supply compressed air to pneumatic tools as well as to transfer water and light chemicals in industry and Agriculture. Features a high quadruple safety factor. It is resistant to abrasion, weathering and ozone. On request, we can protect Hoses with cord-reinforced diameters with an additional outer wire spiral to protect against deformation and excessive abrasion of the outer layer of the hose. Working Temperature From -30°C to +80°C Short-term up to +100°C Hoses are also available for continuous use from -40°C and up to +100°C. CONSTRUCTION Complies with EN ISO 2398. Inner layer Black-colored rubber made of oil-resistant synthetic rubber. Reinforcement Variable depending on the diameter - textile cord spacers or braided with high-strength synthetic threads. Outer layer Black-colored synthetic rubber rubber, resistant to abrasion and the effects of oil, weather and ozone. Diameters up to DN 12.5 smooth, larger with fabric imprint. SIGNING Diameters with a smooth surface are marked with white paint. Diameters with fabric imprint marked with light blue tape.

Working Pressure: 16 bar (1.6 MPa) |. Bursting Pressure: 64 bar (6.4 MPa) |. Class: A | Categories: N-T |. Safety factor: 4:1 | Working Temperature: From -30°C to +80°C; short-term up to +100°C

CHARACTERISTICS Working Pressure - 16 bar (1.6 MPa) Bursting Pressure - 64 bar (6.4 MPa) Class A Category N-T Safety factor of 4:1 APPLICATION A reliable hose commonly used to supply compressed air to pneumatic tools. It is also designed for the transfer of water and light chemicals in industry and Agriculture. It features a high quadruple safety factor. It is resistant to abrasion, weathering and ozone. On request, we can protect Hoses with cord-reinforced diameters with an additional outer wire spiral to protect against deformation and excessive abrasion of the outer layer of the hose. Working Temperature From -30°C to +80°C Short-term up to +100°C Hoses are also available for continuous use from -40°C and up to +100°C. CONSTRUCTION Complies with EN ISO 2398 (TYPE 2). Inner layer Black colored rubber made of SBR synthetic rubber. Reinforcement Variable depending on the diameter - textile cord spacers or braided with high-strength synthetic threads. Outer layer Rubber made of SBR / EPDM synthetic rubber, black in color, resistant to abrasion and weathering and ozone. Diameters up to DN 12.5 smooth, larger with fabric imprint. SIGNING Diameters with a smooth surface are marked with white paint. Diameters with fabric imprint marked with light blue tape.