Categories

Working Pressure: 63 bar | Hoses in Promotions (for Mining): mm: 31 | Nominal Diameter Inch: 1 ¼” | Smallest bend radius: 420mm | Weight: 1.19 kg/m

APPLICATION Specialty flame retardant and anti-electrostatic hoses dedicated to Mining. MSHA approved anti-electrostatic and flame retardant. Meeting mining requirements, for machinery and equipment operating under high pressure in underground workings of mining plants. Designed to work in areas at risk of methane and coal dust explosion. Hoses can be used for : - hydraulic fluids complying with ISO 6743-4 except HFD R, HFD S, HFD T (from -40°C to +100°C), - aqueous solutions (from -40°C to +70°C), - water (from 0°C to +70°C), - compressed air (from 0°C to +80°C). They are not designed for fluids containing castor oil and esters. Working Pressures From 63 to 250 bar, depending on the diameter. Working Temperature From -40°C to +100°C Short-term up to +125°C CONSTRUCTION Complies with EN 853, ISO 6805, PN-G-32010 standards Inner layer Black colored rubber made of synthetic rubber resistant to oil and water. Reinforcement One Wire Braided high strength steel wire. Outer layer Black colored rubber made of synthetic rubber flame retardant and anti-electrostatic, resistant to abrasion, oil, weather and ozone. For diameters from DN 6 to DN 19, it is possible to produce Hoses in a version coated with ultra abrasion-resistant Black Diamond coating (UHMWPE) with MSHA approval. CERTIFICATES : A certificate authorizing the marking of the product with a safety mark confirming its application to supply and drainage systems of machinery and equipment operating under high pressure in underground workings of mining plants in non-methane and methane fields classified as grade «A» or «B» coal dust explosion hazard. Certificate confirming the use of Hoses in underground mines MSHA (USA). Also check out HYDRAULIC Hoses: 1 SC, 2 SC, 1 SN, 2 SN, ETH 221, 3 SP, 2 TE i Car Wash Hoses, Hoses for Mining

Four-jawed end M10 x 1

Four-jawed end M10 x 1

Oil-Resistant detail used as a shim for joists and as rubber pads for shimming in auto repair shops.

Application: For jacks in auto repair shops, as joist pads.

Dimensions: 8.0x500x600mm

Dimensions: 8.0x500x600mm Dimensional tolerances:

• thickness 8.0+0.5mm
• length 600+/-15mm
• width 500+/-10mm

The parameters of the mixture intended for the production of this detail:

L.p	Parameters	Unit	Value	Test method
1.	Hardness H	oSh	50+5	PN-80/C-04238
2.	Tensile strength Rr	MPa	min. 5	PN-ISO 37
3.	Elongation at break Er	%	min. 300	PN- ISO 4649
4.	Brittleness temperature	oC	max. -40	PN-ISO 812
5.	Swelling: - oil #3 72h/100oC ΔV - oil no. 2 24h/70oC Δm - isooctane-toluene (70:30) 24h/70oC Δm	%	max. +40 max. +15 max. +30	PN-ISO 1817
6.	Compression strain by 25%, 22h/ 100oC	%	max.50	PN-ISO 815

Application: for playgrounds.

Additional dimensions:

plastic, thrust ring for mounting on the Fittings between the nut and the flange of the Fittings body

plastic, thrust ring for mounting on the Fittings between the nut and the flange of the Fittings body

O 5 mm thick and packaged in rolls wide 1200 mm and lengths 12 meters | Hardness: 80±5°Shore A |. Working Temperature: From -25℃ to +70℃

Format: roll 1.2x10m. O 5 mm thick and packaged in rolls wide 1200 mm and lengths 12 meters

Hardness: 50 to 85°Sh | Chloroprene concentration: 6 or 12% |. Operating temperature: from -30 to 100°C | Available in sheet or roll | Thickness: 1 to 50mm

Chloroprene Sheets are made of butadiene-sterine rubber (SBR) and chloroprone (CR). Thanks to its special design, it has versatile properties. They are used as a protective coating in contact with less aggressive oils and other chemical liquids, while the increased resistance to thermal aging and low concentration ozone, also allows their use in outdoor applications.

Rubber Sheets hardness: 70+5^oSh | Operating temperature: -40 - 100^oC | Tensile strength: min 4.5 MPa | Available in roll | Thicknesses: 2mm

Railway Rubber Sheets are manufactured from the highest grade of EPDM rubber. They meet the very strict railroad standard EN 45545 in the class R22/R23 and HL 1-3 for materials showing high flame resistance, very low smoke generation and toxicity of the product. They are a semi-finished product for cutting SEALS working in rolling stock.

APPLICATIONS: - horizontal moisture insulation of buildings, - effective insulation of balconies and terraces, - protect the object in a permanent way against degradation caused by the harmful effects of weathering, - hydrophobic product PRODUCT ADVANTAGES:  EPDM rubber-based product,  PN-EN 14909:2012 compliance,  effective moisture protection, Good mechanical properties to protect the product from tearing,  Stretch product - making it easier to fit the shape of the product to the appropriate surface,  RUBBER SHEETS suitable for use in environments with different levels of corrosive exposure (temperature range: from - 40 C to 120 C,  An additional pattern on the surface makes it easier to install and prevents the material from shifting,  high quality product. Possibility to cut the product according to the individual customer's request as part of the provided CNC plotter cutting services.

Rubber Sheets hardness: 70+5^oSh | Operating temperature: -30 - 100^oC | Tensile strength: min 10 MPa | Available in roll | Thicknesses: 3mm

Marbled Rubber Sheets are scratch-resistant and used as workbench lining with high tensile and tear strength. They are characterized by high decorative qualities. They are manufactured from specialized acrylonitrile butadiene rubber ensuring high oil resistance of the board especially when using oily tools and contact with greases. The marbling pattern is unique to each roll.